No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change devicemanager tls

change devicemanager tls

Function

The change devicemanager tls command is used to modify the earliest TLS protocol version supported by DeviceManager.

Format

change devicemanager tls min_version=? [ controller_id=? ]

Parameters

Parameter

Description

Value

min_version=?

Earliest TLS protocol version supported by DeviceManager.

The value can be:

  • "v1.0": TLS version 1.0.
  • "v1.1": TLS version 1.1.
  • "v1.2": TLS version 1.2.

controller_id=?

ID of a controller.

The value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3, for example: "0A".

Level

Administrator

Usage Guidelines

  • After you have run the "change devicemanager tls min_version" command to modify the earliest TLS protocol version supported by DeviceManager, you need to run the "reboot storage service service_name=devicemanager" command to make the modification take effect.
  • Running the "reboot storage service service_name=devicemanager" command results in temporarily inaccessible DeviceManager services. Before performing this operation, you need to ensure that all users have exited the DeviceManager services.
  • Running the "change devicemanager tls min_version=? [ controller_id=? ]" command modifies the earliest TLS protocol version supported by DeviceManager for a specified controller.

Example

Change the earliest TLS protocol version supported by DeviceManager to v1.1.

admin:/>change devicemanager tls min_version=v1.1 
DANGER: You are about to modify the earliest TLS protocol version supported by DeviceManager. 
This operation may cause failure to access DeviceManager because the browser does not support the TLS protocol version that will be set. Browsers affected include but are not limited to Firefox 24 and Firefox 25. 
Suggestion: 1. Before performing this operation, check which TLS protocol versions are supported by your browser. Ensure that the browser supports the TLS protocol version that will be set to prevent service exceptions. 
2. After the operation, running the "reboot storage service service_name=devicemanager" command to restart DeviceManager for the operation to take effect. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 317835

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next