No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show vm_container general

show vm_container general


The show vm_container general command is used to query information about all virtual machine (VM) containers.


show vm_container general





Usage Guidelines



Querying information about objects in VM containers.

admin:/>show vm_container general 
  VM Container ID Owner Controller ID Health Status Total Memory Free Memory CPU Isolate Enable CPU Counts Available CPU Counts  
  --------------- ------------------- ------------- ------------ ----------- ------------------ ---------- -------------------- 
  0               0A                  Normal            19.000GB 19.000GB Yes                8          6 
  1               0B                  Normal            19.000GB 19.000GB Yes                8          6

System Response

The following table describes the parameter meanings.



VM Container ID

ID of the VM container.

Owner Controller ID

ID of the owning controller.

Health Status

Health status of the VM container.

Total Memory

Total memory capacity of the VM container, expressed in GB.

Free Memory

Free memory capacity of the VM container, expressed in GB.

CPU Isolate Enable

Whether to isolate the CPU.

CPU Counts

Number of CPUs used by the VM container.

Available CPU Counts

Number of CPUs available to the VM container.

Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 318178

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next