No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification syslog

show notification syslog


The show notification syslog command is used to query the settings of SYSLOG notification.


show notification syslog





Usage Guidelines



Query the settings of SYSLOG notification.

admin:/>show notification syslog 
  Enabled                  : Yes  
  Alert Level              : Warning  
  Syslog Server IP         : 
  Enable Alarm             : Yes 
  Enable Recovery Alarm : No 
  Enable Event             : No 
  Enabled Send System Name : Yes 
  Syslog Server Port       : 514 
  Sending Channel          : TLS 
  Enable Call Home         : Yes 

System Response

The following table describes the parameter meanings.




Indicates whether the SYSLOG notification function is enabled.

Alert Level

Indicates the lowest alarm level required by SYSLOG notification to report an alarm.

Syslog Server IP

Indicates the IP address of the SYSLOG server.

Enable Alarm

Indicates whether the alarm syslog notification function is enabled.This function is enabled by default.

Enable Recovery Alarm

Indicates whether the recovery alarm syslog notification function is enabled.This function is disabled by default.

Enable Event

Indicates whether the event syslog notification function is enabled.This function is disabled by default.

Enable Send System Name

Indicates whether the storage system name is included in syslogs.

Syslog Server Port

Receiving port number of the syslog server.

Sending Channel

syslog sending channel.

Enable Call Home

Indicates whether the call home service syslog notification function is enabled.This function is disabled by default.

Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 317682

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next