No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add host vhost_initiator

add host vhost_initiator

Function

The add host vhost_initiator command is used to add a vhost initiator to a host.

Format

add host vhost_initiator host_id=? wwn=?

Parameters

Parameter

Description

Value

host_id=?

Host ID.

To obtain the value, run the "show host general" command.

wwn=?

vhost initiator WWN.

To obtain the value, run the "show vhost_initiator general" command without parameters.

Level

Administrator

Usage Guidelines

OceanStor 5300 V3 (16 GB), 5500 V3 (24 GB), 5600 V3 (32 GB), 5800 V3 (64 GB), 5800F V3, 5600F V3, and 5500F V3 do not support this command.

Example

Add a vhost initiator to host "0".

admin:/>add host vhost_initiator host_id=0 wwn=21003400a302671a 
DANGER: You are about to add initiator to host. 
Suggestion: Before performing this operation, determine whether the initiator that you have selected belongs to the host. Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 317695

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next