No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vlan general

change vlan general


The change vlan general command is used to change the VLAN maximum transmission unit.


change vlan general name=? mtu=?






VLAN name.

To obtain the value, run the "show vlan general" command.


VLAN maximum transmission unit.

The value is an integer between 1280 and 9000.



Usage Guidelines



  • Change the maximum transmission unit to 1500.
    admin:/>change vlan general name=CTE0.A3.P3.1 mtu=1500 
    DANGER: You are about to modify the MTU settings for VLAN. This operation may interrupt services or cause service exceptions. 
    Suggestion: Before you perform this operation, determine whether the modification is necessary. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n) 
    Command executed successfully.
  • Check the change.
    admin:/>show vlan general name=CTE0.A3.P3.1 
    Name : CTE0.A3.P3.1  
    Running Status : Link Down  
    VLAN ID : 1  
    MTU : 1500  
    Port Type : ETH  
    Port ID : CTE0.A3.P3

System Response


Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321115

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next