No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create host_group

create host_group


The create host_group command is used to create a host group.


create host_group name=? [ host_group_id=? | host_id_list=? ] *

create host_group name=? [ host_group_id=? | host_name_list=? ] *






Host group name.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).


Host group ID.

The value ranges from 0 to n minus one. The n indicates the maximum number product supported of host groups.

If you do not specify this parameter, the system automatically allocates an ID for a new host group.


Host ID. When this parameter is specified, the host corresponding to the ID is added to a host group.

  • To obtain the value, run "show host general".
  • When multiple hosts need to be added, separate these host IDs with commas (,), or separate host ID range with hyphens (-), such as: 0,5-8.


Host name.

  • To obtain the value, run "show host general".
  • When multiple hosts need to be added, separate these host names with commas (,), such as: "hostname0,hostname1,hostname8".



Usage Guidelines

A host group can be added with a maximum of 64 hosts and a host can be added to a maximum of 64 host groups.


Create host group "test".

admin:/>create host_group name=test 
Create host group successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321920

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next