No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp engineid

show snmp engineid

Function

The show snmp engineid command is used to query the SNMP engine ID on a controller.

Format

show snmp engineid controller=?

Parameters

Parameter

Description

Value

controller

ID of a controller.

The value is in the format of "SVP", "XA", "XB", "XC", or "XD", where the "X" is an integer ranging from 0 to 3. "SVP" is valid only when an SVP device is used.

Level

Guest

Usage Guidelines

The "show snmp engineid controller=?" command is used to query the SNMP engine ID on a specified controller.

Example

Query the SNMP engine ID on controller 0A.

 admin:/>show snmp engineid controller=0A 
  SNMP V3 EngineID      : 2102350BSJ10572330510                                                         
  SNMP V3 EngineID(HEX) : 80 00 13 70 05 32 31 30 32 33 35 30 42 53 4A 31 30 35 37 32 33 33 30 35 31 30 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

SNMP V3 EngineID

Engine ID of the SNMPv3 protocol.

SNMP V3 EngineID(HEX)

Engine ID of the SNMPv3 protocol, expressed in hexadecimal.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 312222

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next