No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hypervault remote_resource

remove hypervault remote_resource

Function

The remove hypervault remote_resource command is used to delete the remote backup function.

Format

remove hypervault remote_resource hypervault_id=? [ reserve_copy=? ]

Parameters

Parameter

Description

Value

hypervault_id=?

ID of the HyperVault object.

To obtain the value, run "show hypervault general" without parameters.

reserve_copy=?

Copy reserving policy.

The value is "yes" or "no", where:

  • "yes": to reserve copies.
  • "no": to delete copies.

The default value is "yes".

Level

Administrator

Usage Guidelines

None

Example

To delete remote backup of HyperVault task "9747215445131264", run the following command.

admin:/>remove hypervault remote_resource hypervault_id=9747215445131264 
DANGER: You are about to remove the remote backup function of HyperVault. 
This operation deletes the remote backup relationship between the primary and secondary file systems. New data written into the primary file system cannot be remotely backed up. Data of the file system copies on the secondary file system cannot be recovered to the primary system. The deletion cannot be undone. 
Suggestion: Before performing this operation, ensure that you have selected the correct object to delete. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320713

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next