No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show virtual_machine general

show virtual_machine general

Function

The show virtual_machine general command is used to view all virtual machine (VM) information.

Format

show virtual_machine general vm_id=?

Parameters

Parameter

Description

Value

vm_id=?

VM ID.

To obtain the value, run the "show virtual_machine general" command without parameters.

Level

Guest

Usage Guidelines

None.

Example

  • View information about all VMs.
    admin:/>show virtual_machine general 
      ID Name Owner Container ID Health Status Running Status First Start Mode  
      -- ---- ------------------ ------------- -------------- ----------------  
      1  test 0                  Normal        Powered Off HD
  • Get VM information by specifying the ID.
    admin:/>show virtual_machine general vm_id=1 
      ID                   : 1  
      Name                 : test  
      VM WWN               : --  
      Owner Container ID : 0  
      Work Container ID : 0  
      Health Status        : Normal  
      Running Status       : Powered Off  
      Memory               : 2.000GB  
      CPU Counts           : 2  
      System Disk Size     : 100.000GB  
      First Start Mode     : HD  
      Secondary Start Mode : CDROM  
      VMTools Version      : --  
      System Disk Bus Mode : IDE  
      VM Template          : --  
      ISO Name             :  
      Failover Switch      : Off 
      Hyper-V Switch       : Off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

VM ID.

Name

VM name.

VM WWN

VM WWN.

Owner Container ID

ID of the VM owner container.

Work Container ID

ID of the VM working container.

Health Status

Health status of the VM.

Running Status

Operating status of the VM.

Memory

Maximum memory that the VM can adjust.

CPU Counts

Number of CPUs.

System Disk Size

System disk size of the VM.

First Start Mode

Startup mode of the VM.

Secondary Start Mode

Alternative startup mode of the VM.

VMTools Version

VMTools version.

System Disk Bus Mode

Bus mode of the system disk.

VM Template

Name of the VM template.

ISO Name

Name of the ISO file.

Failover Switch

Whether to enable the failover function.

Hyper-V Switch

Whether to enable the Hyper-V virtualization feature.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 311683

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next