No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk in_domain

show disk in_domain

Function

The show disk in_domain command is used to query information about member disks in a specified disk domain.

Format

show disk in_domain disk_domain_id=?

Parameters

Parameter

Description

Value

disk_domain_id=?

Disk domain ID.

To obtain the value, run "show disk_domain general".

Level

Guest

Usage Guidelines

None

Example

Query information about member disks in disk domain "0". The ID and output vary depending on a specific product.


admin:/>show disk in_domain disk_domain_id=0 

  ID       Health Status  Running Status  Type  Capacity Logic Type Disk Domain ID  Speed(RPM) 
  -------  -------------  --------------  ----  ---------  -----------  --------------  ---------- 
  CTE0.0 Normal         Online          SAS 549.976GB  Member Disk  0               0            
  CTE0.1 Normal         Online          SAS 549.976GB  Member Disk  0               10000        
  CTE0.2 Normal         Online          SAS 549.976GB  Member Disk  0               10000        
  CTE0.3 Normal         Online          SAS 549.976GB  Member Disk  0               10000        
  CTE0.5 Normal         Online          SAS 555.054GB  Member Disk  0               10000        
  CTE0.6 Normal         Online          SAS 555.054GB  Member Disk  0               0          
  CTE0.9 Normal         Online          SAS 555.054GB  Member Disk  0               10000        
  CTE0.10  Normal         Online          SAS 555.054GB  Member Disk  0               10000  

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Disk ID.

Health Status

Health status.

Running Status

Running status.

Type

Disk type.

Capacity

Capacity of a disk (The capacity is calculated based on the sector size of 512 bytes. If the sector size employed by a disk is not 512 bytes, the value may be different from the actual capacity).

Logic Type

Disk logic type.

Disk Domain ID

ID of the disk domain to which a disk belongs.

Speed(RPM)

Speed (RPM).

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 319083

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next