No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_support general

change remote_support general


The change remote_support general command is used to configure basic information about the Call Home service.


change remote_support general [ center_id=? ] [ proxy_switch=? ] [ proxy_address=? ] [ proxy_port=? ] [ proxy_username=? ] [ proxy_password=? ] [ site_name=? ]






Technical support center.

The value contains 1 to 63 characters.


Switch for enabling or disabling a proxy server.

  • 0:off.
  • 1:on.


Proxy server address.

The value can be a domain name or an IPv4 address. The domain name is a case-insensitive string of 1 to 255 characters, including letters, digits, and hyphens (-). Domain names at various levels are separated by periods (.). Hyphens (-) cannot be the start or end of the domain name.


Port number of a proxy server.

The value ranges from 1 to 65535.


User name for logging in to a proxy server.

The value contains 1 to 63 characters excluding single quotation marks (').


Password for logging in to a proxy server.

The value contains 1 to 63 characters.


Site name.

The value contains 1 to 63 characters excluding single quotation marks (').


Super administrator

Usage Guidelines

  • This command can be used to configure a technical support center for the Call Home service. Messages at the technical support center can be queried by running the "show remote_support technical_support_center" command.
  • This command can be used to configure information about the proxy server of the Call Home service.


Configure basic information about the Call Home service.

admin:/>change remote_support general center_id=CenterEC proxy_switch=on proxy_address= proxy_port=8080 proxy_username=admin proxy_password=********** 
WARNING: You are about to change the technical support center of the Call Home service. This operation will disable the ongoing Call Home service. The Call Home service can be enabled for a new technical support center only after the technical support center is authenticated. 
Suggestion: Before performing this operation, contact technical support engineers and confirm that the selected technical support center obeys the local law. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320409

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next