No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapshot general

show snapshot general

Function

The show snapshot general command is used to query snapshot information.

Format

show snapshot general [ snapshot_id=? ] [ snapshot_name=? ] [ usage_type=? ]

Parameters

Parameter

Description

Value

snapshot_id=?

Snapshot ID.

To obtain the value, run "show snapshot general" without parameters.

snapshot_name=?

Snapshot name.

To obtain the value, run "show snapshot general" without parameters.

usage_type=?

Snapshot type.

The value can be "LUN_SNAP" or "VVOL_SNAP".

Level

Guest

Usage Guidelines

  • Run show snapshot general to query information about all snapshots.
  • Run show snapshot general snapshot_id=? to query information about a specified snapshot.

Example

Query detailed information about snapshot "1".

admin:/>show snapshot general snapshot_id=1 

  ID                   : 1 
  Name                 : SnapshotName 
  Source LUN ID        : 0 
  Source LUN Name      : Lun2 
  Health Status        : Normal 
  Running Status       : Restore 
  Capacity             : 1.000GB 
  Subscribed Capacity  : 0.000GB 
  WWN                  : 6000000100000000196872da00000001 
  Time Stamp           : 2013-07-24/14:18:38 +08:00 
  Restore Start Time : 2013-07-24/16:25:04 +08:00 
  Restore End Time     : -- 
  Restore Speed        : Low 
  Restore Progress(%)  : 18 
  Exposed To Initiator : Unmapped 
  IO Priority          : Low                              
  SmartQoS Policy ID :                                  
  Usage Type           : LUN SNAP                         
  Protection Capacity  : 0.000B 
  Description          :

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Snapshot ID.

Name

Snapshot name.

Source LUN ID

Source LUN ID.

Source LUN Name

Source LUN Name.

Health Status

Health status of the snapshot.

Running Status

Running status of the snapshot.

Capacity

Snapshot capacity.

Subscribed Capacity

Subscribed capacity.

WWN

World Wide Name (WWN) of the snapshot.

Time Stamp

Time stamp of the snapshot.

Restore Start Time

Restore start time of the snapshot.

Restore End Time

Restore end time of the snapshot.

Restore Speed

Restore speed of the snapshot.

Restore Progress(%)

Restore progress(%).

Exposed To Initiator

Mapped or not.

IO Priority

I/O priority.

SmartQoS Policy ID

SmartQoS policy ID.

Usage Type

Usage type.

Protection Capacity

Protection capacity.

Description

Description.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 312161

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next