No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete remote_device

delete remote_device

Function

The delete remote_device command is used to remove a specific remote devices.

Format

delete remote_device remote_device_id=?

Parameters

Parameter

Description

Value

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

Level

Administrator

Usage Guidelines

  • Running this command erases the information on the selected remote device from the storage system.
  • Before running this command, ensure that the selected remote device is exactly the one you want to remove.

Example

Remove remote device "0".

admin:/>delete remote_device remote_device_id=0 
WARNING: You are going to remove remote device. This operation deletes the information about the remote device from the system. 
Suggestion: Before you perform this operation, ensure that you have selected the correct remote device, which is considered unnecessary. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320323

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next