No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_lun count

show remote_lun count

Function

The show remote_lun count command is used to query the number of LUNs in a remote device.

Format

show remote_lun count array_type=? [ remote_device_id=? ] [ link_type=? ] [ link_id=? ]

Parameters

Parameter

Description

Value

array_type=?

Type of a remote device.

Values:

  • replication: The remote device is made by Huawei.
  • heterogeneity: The remote device is made by a third-party manufacturer.

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

link_type=?

Link type.

Values:

  • FC: A remote device is connected to a local device by Fibre Channel links.
  • iSCSI: A remote device is connected to a local device by iSCSI links.

link_id=?

Link ID.

Run the "show remote_device link" or "show remote_device elink" command without any parameters to obtain the value.

Level

Guest

Usage Guidelines

  • If the link_type parameter is set, you must set the link_id parameter.
  • The following parameters or parameter sets are mutually exclusive: link_type and remote_device_id.

Example

Query the number of LUNs in remote device "0".

admin:/>show remote_lun count array_type=replication remote_device_id=0 
Remote Lun Count 
---------------- 
8

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Remote Lun Count

Number of remote LUNs.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321429

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next