No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove virtual_machine port

remove virtual_machine port

Function

The remove virtual_machine port command is used to remove a port that has been added to a virtual machine.

Format

remove virtual_machine port vm_id=? vm_port_id=?

Parameters

Parameter

Description

Value

vm_id=?

VM ID.

To obtain the value, run the "show virtual_machine general" command without parameters.

vm_port_id=?

ID of a virtual machine port.

To obtain the value, run the "show virtual_machine port" command without parameters.

Level

Administrator

Usage Guidelines

None.

Example

  • Remove a physical port that has been added to a VM.
    admin:/>remove virtual_machine port vm_id=2 vm_port_id=131073 
    WARNING: You are about to remove a port from a virtual machine. This operation will interrupt the related communication service on the virtual machine. 
    Suggestion:  Before performing this operation, ensure that you have selected the correct virtual machine and port. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Remove a bonding port that has been added to a VM.
    admin:/>remove virtual_machine port vm_id=2 vm_port_id=139009               
    WARNING: You are about to remove a port from a virtual machine. This operation will interrupt the related communication service on the virtual machine. 
    Suggestion:  Before performing this operation, ensure that you have selected the correct virtual machine and port. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321126

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next