No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
upgrade_ultrapath_flag.sh

upgrade_ultrapath_flag.sh

Function

The upgrade_ultrapath_flag.sh command is used to create a file after manually check there is no risk with host multipathing. If the file exists, the system will not check the multiple paths of single chain risk.

Format

upgrade_ultrapath_flag.sh -c

upgrade_ultrapath_flag.sh -h

Parameters

Parameter

Description

Value

-h

View the help information about upgrade_ultrapath_flag.sh command.

-

-c

If the UltraPath is normal, run this command to create a flag file.

-

Modes

Minisystem mode

Usage Guidelines

If the UltraPath is normal, then run this command to create a flag file.

Example

  • If the UltraPath is normal, run the upgrade_ultrapath_flag.sh command to create a flag file.
    Storage: minisystem>upgrade_ultrapath_flag.sh -c 
    The script file execute success.
  • View the help information about upgrade_ultrapath_flag.sh command.
    Storage: minisystem>upgrade_ultrapath_flag.sh -h 
    upgrade_ultrapath_flag.sh [-c] | [-h] : To create a file after manually check there is no risk with host multipathing. If the file exists, the system will not check the multiple path of single chain risk. 
    -h, --help show help info. 
    -c, --check ultrapath is ok, then execute this shell code to create a flag file.

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138389

Views: 392762

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next