No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete clone_dcl

delete clone_dcl

Function

The delete clone_dcl command is used to forcibly delete the DCL information of a specified clone on a specified LUN.

Format

delete clone_dcl lun_id=? dcl_id=?

Parameters

Parameter

Description

Value

lun_id=?

Indicates the ID of a LUN.

To obtain the value, run "show lun general".

dcl_id=?

Indicates the ID of a DCL.

To obtain the value, run "dcl showdclid".

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance.
  • This command can only be used when a clone with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete clone_db" command. Restart the system after running the commands.

Example

To delete the DCL information of clone 3 on LUN 0, run the following command.

developer:/>delete clone_dcl lun_id=0 dcl_id=3 
DANGER: You are clearing the clone DCL of a specified LUN, this operation will forcibly delete the DCL of clone. 
Suggestion: Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 487101

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next