No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
os resetdswconfig

os resetdswconfig

Function

The os resetdswconfig command is used to reset the switch to the default configuration.

Format

os resetdswconfig

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Reset the switch to the default configuration.

_super_admin:/diagnose>os resetdswconfig 
WARNNING: You are about to reset the config and reboot the DSW. 
Are you sure you really want to perform the operation? 
(y : continue / other : cancel) 
: y 
Set plane id : 0x55 OK 
Reset the config success. 
The system is going to restart.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 485950

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next