No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change chunk configuration

change chunk configuration

Function

The change chunk configuration command is used to set the threshold number of bad chunks when a disk must be isolated.

Format

change chunk configuration threshold=?

Parameters

Parameter

Description

Value

threshold=?

Threshold number of bad chunks.

The value ranges between "0" and "255".

Views

Developer view

Usage Guidelines

None

Example

To set the threshold number of bad chunks when a disk must be isolated, run the following command:

developer:/>change chunk configuration threshold=3 
WARNING: You are going to adjust the upper limit for the number of isolated chunks. If the number of isolated chunks on a disk exceeds the set value, the disk is failing. 
Suggestion: Perform this operation based on system reliability need. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 485500

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next