No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dedup_lun repair_info

show dedup_lun repair_info

Function

The show dedup_lun repair_info command is used to check the modification results of a dedup LUN.

Format

show dedup_lun repair_info lun_id=? [ policy=? ] [ controller=? ]

Parameters

Parameter

Description

Value

lun_id=?

LUN ID.

The value ranges from 0 to 65535.

policy=?

Repair policy.

The value is "consistency_repair" or "volume_extent_repair", where:

  • "consistency_repair": indicates consistency repair.
  • "volume_extent_repair":indicates extent repair.

controller=?

Indicates the owning controller of the LUN.

he value is in the format of XA or XB or XC or XD.X can be 0 to 3.

Views

Developer view

Usage Guidelines

None

Example

  • To check the consistency repair modification results of a LUN, run the following command.
    developer:/>show dedup_lun repair_info lun_id=0 policy=consistency_repair controller=0A 
    Lun ID                       :0  
    Policy                       :Consistency Repair  
    Type                         :Repair Confirm  
    Consistency Point            :--  
    Backfs ID                    :--  
    Force Enabled                :Disable Force  
    Repair Status                :The repair has been confirmed.  
    Reason                       :--  
    Suggestion                   :--  
    Successful Consistency Point :-- 
    Time                         :--
  • To check the extent modification results of a LUN, run the following command.
    developer:/>show dedup_lun repair_info lun_id=0 policy=volume_extent_repair controller=0A 
    Lun ID : 1 
    Policy : Volume Extent Repair 
    Type : Repair 
    Repair Method : EXTTREE Repair 
    Total Step : 5 
    Current Step : 2.Backup root extent 
    Remaining Time(min) : -- 
    Result : SUCCESS

System Response

The following table describes the parameter meanings.

Parameter

Meaning

LUN ID

LUN ID.

Policy

Repair policy.

Type

Repair operation.

Consistency Point

Consistency point.

Backfs ID

Backup file system ID.

Force Enabled

Forcible repair.

Repair Status

Repair status.

Reason

Reason.

Suggestion

Suggestion.

Successful Consistency Point

Successful Consistency Point.

Time

Consistency Point Time of Successful Rollback.

Repair Method

Repair method.

Total Step

Total step.

Current Step

Current step.

Remaining Time(min)

Remaining time.

Result

Repair result.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503883

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next