No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pmgr showvideocfg

pmgr showvideocfg

Function

The pmgr showvideocfg command is used to query configuration information about the secure video for the specified disk domain.

Format

pmgr showvideocfg -p poolId

Parameters

Parameter

Description

Value

poolId

Disk domain ID.

To obtain the value, run the "show disk_domain general" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query configuration information about the secure video for the specified disk domain.

admin:/diagnose>pmgr showvideocfg -p 0 

  Pool  Id          : 0 
  [CFG]switch       : 0 
  [CFG]disks        : 3 
  [CFG]time         : 604800 
  [RUN]leftTime     : 0 
  [RUN]lastPeriod : 0 
  [RUN]timerId      : 4294967295 
  [RUN]timerStamp : 0 
  [RUN]isExceedTimer: 0 
  [RUN]isExceedDisks: 0 
  [RUN]realStatus : 1 

admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Pool Id

Disk domain ID.

switch

Indicates whether the secure video is enabled.

disks

Maximum number of faulty disks.

time

Continuous service time.

leftTime

Remaining service time.

lastPeriod

Last period.

timerId

Timer ID.

timerStamp

Time to start the timer.

isExceedTimer

Indicates whether a timeout occurs for the timer.

isExceedDisks

Indicates whether the maximum number of redundant disks is exceeded.

realStatus

Real status of the disk domain.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 498128

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next