No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showlog

sys showlog

Function

The sys showlog command is used to view recent important logs of the system control.

Format

sys showlog { -a | -e | -w | -i }

Parameters

Parameter

Description

Value

-a

Shows all the recent logs of the system control.

-

-e

Shows all the error logs of the system control.

-

-w

Shows all the warning logs of the system control.

-

-i

Shows all the info logs of the system control.

-

Views

Diagnostic view

Usage Guidelines

Run this command in debug mode in developer view.

Example

Showing recent important logs of the system control.

admin:/diagnose>sys showlog -a 
[0][2015-07-08 02:51:56][4] CLM: Max msg num is (16640). 
[0][2015-07-08 02:51:56][4] CLM: Master version is 0 
[0][2015-07-08 02:51:56][4] CLM: Max LUN num is (4096), max Pool Num is (32). 
[0][2015-07-08 02:52:08][4] LINK_CHECK: Receive link event(event id 35, src nid 0, dst nid 1). 
[0][2015-07-08 02:52:08][4] LINK_CHECK: Receive link event(event id 33, src nid 0, dst nid 1). 
[0][2015-07-08 02:52:47][4] CLS_STATUS: normal 0x0, standby 0x3, fault 0x0, offline 0x0, master 0. 
[0][2015-07-08 02:52:47][4] CLM: Master version is 1 
[0][2015-07-08 02:52:49][4] CLM: Start to reclaim master(ver 0) resource. 
[0][2015-07-08 02:55:59][4] CLS_STATUS: normal 0x3, standby 0x0, fault 0x0, offline 0x0, master 0.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 497198

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next