No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvfc showportinfo

drvfc showportinfo

Function

The drvfc showportinfo command is used to view the port information about the interface module of Pangea 8 Gbit/s Fibre Channel driver.

Format

drvfc showportinfo

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the port information about the interface module of Pangea 8 Gbit/s Fibre Channel driver.

admin:/diagnose>drvfc showportinfo 
port | mode |state|plnk tlnk | Rate | WWPN |MultiDMA|MSI|TCQ|NCQ|Topology|  
0x110000 | COM | open| 0 ,LOST | NoLink(0) | 20005439dfc9a015 | ON | ON|OFF|OFF| 5( 15)| 
|LossOfSignal|Bad RX Char|Loss of Sync|Link Fail| RxEOFa |DisFrame|Bad CRC|Proto error| 
| 0| 0| 0| 0| 0| 0| 0| 0| 
-------------------------------------------------------------------------------------------------- 
port | mode |state|plnk tlnk | Rate | WWPN |MultiDMA|MSI|TCQ|NCQ|Topology|  
0x110001 | COM | open| 0 ,LOST | NoLink(0) | 20015439dfc9a015 | ON | ON|OFF|OFF| 5( 15)| 
|LossOfSignal|Bad RX Char|Loss of Sync|Link Fail| RxEOFa |DisFrame|Bad CRC|Proto error| 
| 0| 0| 0| 0| 0| 0| 0| 0| 
-------------------------------------------------------------------------------------------------- 
port | mode |state|plnk tlnk | Rate | WWPN |MultiDMA|MSI|TCQ|NCQ|Topology|  
0x110002 | COM | open| 0 ,LOST | NoLink(0) | 20025439dfc9a015 | ON | ON|OFF|OFF| 5( 15)| 
|LossOfSignal|Bad RX Char|Loss of Sync|Link Fail| RxEOFa |DisFrame|Bad CRC|Proto error| 
| 0| 0| 0| 0| 0| 0| 0| 0| 
-------------------------------------------------------------------------------------------------- 
port | mode |state|plnk tlnk | Rate | WWPN |MultiDMA|MSI|TCQ|NCQ|Topology|  
0x110003 | COM | open| 0 ,LOST | NoLink(0) | 20035439dfc9a015 | ON | ON|OFF|OFF| 5( 15)| 
|LossOfSignal|Bad RX Char|Loss of Sync|Link Fail| RxEOFa |DisFrame|Bad CRC|Proto error| 
| 0| 0| 0| 0| 0| 0| 0| 0|

System Response

The following table describes the parameter meanings.

Parameter

Meaning

port

Port ID.

mode

Port properties.

state

Port status.

plnk

Whether the synchronization signal is normal.

tlnk

Whether link negotiation is normal.

Rate

Working rate.

WWPN

Port world wide name (WWN).

MultiDMA

Whether MultiDMA is enabled.

MSI

Whether MSI is enabled.

TCQ

Whether TCQ is enabled.

NCQ

Whether native command queuing (NCQ) is enabled.

Topology

Port topology mode (working mode or

configuration mode).

LossOfSignal

Count of lost signals.

Bad RX Char

Count of received incorrect characters.

Loss of Sync

Count of lost synchronization.

Link Fail

Count of link failures.

RxEOFa

Count of received EOFas.

DisFrame

Count of lost frames.

Bad CRC

Count of incorrect cyclic redundancy checks (CRCs).

Proto error

Count of incorrect protocols.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 498728

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next