No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
chgibcpasswd

chgibcpasswd

Function

The chgibcpasswd command is used to change the password of ibc_os_hs.

Format

chgibcpasswd

Parameters

None

Modes

serial port mode

Usage Guidelines

  • Change the ibc_os_hs password on each controller and ensure that the password is the same.Change the ibc_os_hs password on the primary controller first. If the password fails to be changed on a secondary controller, run ibcpasswd to initialize the password and reset the ibc_os_hs password. For details, see the ibcpasswd usage guidelines. Repeat the operations until the password is successfully changed.
  • After changing the password for an engine, you must change the password of user ibc_os_hs for the data switches. Otherwise, user functions are affected.
  • If the local boot disk is damaged, formatted, or fails to be mounted, the new ibc_os_hs password cannot be obtained. As a result, files fail to be transferred using the heartbeat port.
  • If a system rollback is implemented after the ibc_os_hs password is changed, the ibc_os_hs password may be restored to the default one, causing system startup failure.
  • This command is only available in serial port mode.
  • Periodically change the ibc_os_hs password to ensure password security.
  • For x86 without reinforced system permission, this command requires entering the old and new passwords of ibc_os_hs. For ARM64 and x86 with reinforced system permission, this command only requires entering the new password of ibc_os_hs. The new password must:
    • The password length ranges from 8 to 16 characters.
    • Contain any three of the following characters: one lowercase letter, one uppercase letter, one digit, or one special character (`~!@#$%^&*()-_=+\|[{}];:"',<.>/?).
    • Be different from the user name or the user name in a reversed order.

Example

Change ibc_os_hs's password.

Storage: _super_admin> chgibcpasswd 
*****Please enter new password for ibc_os_hs,length is required not less than 8 chars or more than 
16 chars :***** 
*****Please re-enter new password for ibc_os_hs,length is required not less than 8 chars or more 
than 16 chars :***** 
The password of ibc_os_hs is changed successfully. 
The change of ibc_os_hs's passwd is successful.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503515

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next