No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair full_sync_cfg

change hyper_metro_pair full_sync_cfg


The change hyper_metro_pair full_sync_cfg command is used to fully synchronize configurations of a specific HyperMetro pair.


change hyper_metro_pair full_sync_cfg pair_id=? partition_type=?






HyperMetro pair ID.

Run the "show hyper_metro_pair general" command to obtain the value.


Type of a configuration synchronization partition.

  • "nfs_share": NFS share partition. Configurations in this partition include NFS share and NFS share permission.
  • "smb_share": SMB share partition. Configurations in this partition include CIFS share, CIFS share permission, IP control rule, file extension filter, and homedir rule.
  • "quota": quota partition. The configurations in this partition includes quota.


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.


Fully synchronize configurations of a specific HyperMetro pair whose pair ID is "200bc79b99520000" and partition type is "nfs_share".

developer:/>change hyper_metro_pair full_sync_cfg pair_id=200bc79b99520000 partition_type=nfs_share 
WARNING: You are going to start configuration full synchronization. 
Once configuration synchronization is started, remote configuration will be overwritten by local configuration. After configuration synhronization, the configuration cannot be restored. 
Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent configuration loss. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 499927

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next