No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eam showglobaldbtable

eam showglobaldbtable

Function

The eam showglobaldbtable command is used to view the global DB information.

Format

eam showglobaldbtable node_id table_type index

Parameters

Parameter

Description

Value

node_id

Controller ID.

-

table_type

The type of DB table.

The value can be "0,2,3,4,7,8,9,10,11,12", where:

  • "0": Device information.
  • "2": Port configuration information.
  • "3": Ethernet port configuration information.
  • "4": Ethernet port Ipv6 configuration information.
  • "7": Loop map information.
  • "8": Route information.
  • "9": VLAN information.
  • "10": Logical port information.
  • "11": Failover group information.
  • "12": Logical port route information.
  • "13": Interface module configuration information.
  • "14": Ethernet port configuration information.
  • "15": Ethernet port IPv6 configuration information.
  • "16": IPv4 configuration information.
  • "17": IPv6 configuration information.

index

Index.

When the value of table_type is 0, the value of index can only be 0.

Views

Diagnostic view

Usage Guidelines

None

Example

View the global DB information.

admin:/diagnose>eam showglobaldbtable 0 0 0 
----------EAM NODE DB (table=0x0) Info---------- 
table name:      DEV_INFO_TABLE 
index:      0 
uiMagic             = 0x1b67f 
szProductName       = 5800_V3 
szProductSn         = 210235980510EC000003 
szProductOwner      = HW000001 
szProductBrand      = OceanStor 
szOEMProductName = 5800_V3

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 486697

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next