No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d i2cread

cliget -d i2cread

Function

The cliget -d i2cread command is used to read information about i2c.

Format

cliget -d i2cread parm1 parm2 parm3 parm4 parm5

Parameters

Parameter

Description

Value

parm1

i2c bus number.

The value ranges from 0 to 11.

parm2

IP address of the standby server.

The value ranges from 0x0 to 0xFF.

parm3

LBA address length.

The value ranges from 0 to 2.

parm4

Offset address.

The value ranges from 0x0 to 0xFFFF.

parm5

Read length.

The value ranges from 1 to 20.

Modes

serial port mode

Usage Guidelines

None

Example

Reading the component whose slave address is 0xe2, LBA address is 0x0, and offset is 0 from bus i2c3.

administrator@SMM_6U / $ cliget -d i2cread 3 0xe2 0x00 0x00 1 
****enter data start*** 
[3]--[e2]--[0]--[0]--[1]-- 
*****end**** 
i2c_chan[3] tx_len=[1] Readlen[1] 
***Tx buf*** 
[e2]-[ff]-[ff]-[ff]-[ff]- 
***END*** 
open i2c init ok 
I2C Readsucess

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 501343

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next