No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
epl showreport

epl showreport

Function

The epl showreport command is used to view information about the event of remote device.

Format

epl showreport

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View information about the event of remote device.

admin:/diagnose>epl showreport 
TotalReportEvent: 1 
ObjId  Event Jiffies  TIME 
0  UP 127038  2016-3-18 14:23:15 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ObjId

ID of the remote device.

Event

Event type.

Jiffies

Jiffies value of the report.

TIME

Time of report.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 486153

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next