No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create third_party_policy provider

create third_party_policy provider

Function

The create third_party_policy provider command is used to create server information about a third-party policy.

Format

create third_party_policy provider policy_name=? server_ips=? port=?

Parameters

Parameter

Description

Value

policy_name=?

Policy name.

The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_).

server_ips=?

IP address list of a third-party server.

The value is an IPv4 address.

port=?

Port number of a third-party server.

The value range is 1 to 65535.

Views

Developer view, vstore developer view

Usage Guidelines

Parameters "policy_name=?", "server_ips=?" and "port=?" are mandatory.

Example

  • Create server information about a third-party policy.
    developer:/>create third_party_policy provider policy_name=test address=10.1.1.1 port=1  
    Command executed successfully.
  • Query creation results.
    developer:/>show third_party_policy provider policy_name=test 
    Policy ID: 1 
    Policy Name: test 
    Server IPs: 10.1.1.1 
    Port: 1

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 487226

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next