No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dq

dq

Function

The dq command is used to disable or enable the query and routine tests.

Format

dq [parameter]

Parameters

Parameter

Description

Value

parameter

Disables or enables the query and routine tests.

The value is "0", "1", or "2", a hexadecimal value is also supported. where:

  • "0": disables polling.
  • "1": enables all polling.
  • "2": reserves handshaking only.

Modes

serial port mode

Usage Guidelines

  • If current status of the query and routine tests is disabled and you run the "dq" command without parameters or run the "dq 1" command, the status of the query and routine tests will be enabled.
  • If current status of the query and routine tests is enabled and you run the "dq" command without parameters or run the "dq 0" command, the status of the query and routine tests will be disabled.
  • If you run the "dq 2" command, only handshaking will be reserved.
  • If you run this command to disable routine tests, the running status of a device system cannot be monitored. Running this command is a highly risky operation. Execute this command with caution when there are ongoing services.

Example

Run the "dq" command to disable the query and routine tests.

PANGEA_SES:>dq 
pre status: 1 enable query 

current status: disable query

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 488383

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next