No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr repairextentcountshow

mrr repairextentcountshow


The mrr repairextentcountshow command is used to view the status of metadata counter repair.


mrr repairextentcountshow




Diagnostic view

Usage Guidelines



View the metadata counter repair status.

admin:/diagnose>mrr repairextentcountshow 
        Repair zone ckg bitmap info: 

        Disk Domain ID           : 4294967295 
        Is repairing             : No 
        Result                   : Pool is not repaired! 
        Fail Reason              : -- 
      Begin Time               : -- 
        End Time                 : -- 
        Total Zone Number        : 0 
        Processed Zone Number : 0 
        Repaired Fail Zone Number: 0 

        Index  Zone ID  Alloc Extent  Origin Extent  Conflict CKG  Result 
        -----  -------  ------------  -------------  ------------  ------ 

System Response

The following table describes the parameter meanings.



Disk Domain ID

Indicates the disk domain ID.

Is repairing

Indicates the repair status.


Indicates the result of the operation.

Fail Reason

Indicates the reason why the operation fails.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Processed Zone Number

Indicates the count of processed zones.

Total Zone Number

Indicates the count of zones that require processing.

Repaired Fail Zone Number

Indicates the count of zones that fail to be repaired.

Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 497683

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next