No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_device support_array_list

show remote_device support_array_list

Function

The show remote_device support_array_list command is used to check the array support library (ASL) of the heterogeneous disk arrays from a third-party manufacturer.

Format

show remote_device support_array_list [ manufacturer=? ]

Parameters

Parameter

Description

Value

manufacturer=?

Manufacturer name.

The value is one to eight characters in length. Replace spaces with asterisks (*).

Views

Developer view, Engineer view

Usage Guidelines

None

Example

To check the ASL of the heterogeneous disk arrays from EMC, run the following command.

engineer:/>show remote_device support_array_list manufacturer=EMC 


Manufacturer  Model             Path Selector  Fail Back           Fail Over  ASL ID 
------------  ----------------  -------------  ------------------  ---------  ------ 
EMC           CX4-120           ROUND_ROBIN DELAY_FAILBACK      ENABLE     3 
EMC           CX4-240           ROUND_ROBIN DELAY_FAILBACK      ENABLE     3 
EMC           CX4-480           ROUND_ROBIN DELAY_FAILBACK  ENABLE     3 
EMC           CX4-960           ROUND_ROBIN DELAY_FAILBACK      ENABLE     3

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Manufacturer

Manufacturer name.

Model

Product model.

Path Selector

Indicates the algorithm used by a disk array to select a path.

Fail Over

Indicates the failback mode.

Fail Back

Indicates whether failover is enabled.

ASL ID

ASL ID.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 486606

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next