No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
scsi show iocount

scsi show iocount

Function

The scsi show iocount command is used to query related information about SCSI private I/O counting.

Format

scsi show iocount

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query related information about SCSI private I/O counting.

admin:/diagnose>scsi show iocount 
Phase Name                   Start Num           Back Good Num        Back Bad Num      Max Latency(ms)                  
-----------------------      -----------         --------------       -------------     --------------- 
Request DLM Obj Lock       0                   0                    0                 0                                
Request DLM Range Lock       0                   0                    0                 0                                
DLM Obj UnLock               0                   0                    0                 0                                
DLM Range UnLock             0                   0                    0                 0 
UnKnown Phase                0                   0                    0                 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Phase Name

SCSI private I/O implementation phase name.

Start Num

Number of initiated I/O requests.

Back Good Num

Number of successfully implemented I/O requests.

Back Bad Num

Number of failed I/O requests.

Max Latency

Maximum implementation latency.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 500582

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next