No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show space apo_entry_info

show space apo_entry_info

Function

The show space apo_entry_info command is used to query an entry from a specified APO object.

Format

show space apo_entry_info object_set_id=? object_id=? name=? controller=?

Parameters

Parameter

Description

Value

object_set_id=?

Indicates the object set ID.

The value is the sum of the file system ID and the base object set ID. The base object set ID of the file system is "0x4000000000" (in hexadecimal) = "274877906944" (in decimal). The MOS base object set ID is "0x2000000000" (in hexadecimal) = "137438953472" (in decimal). The DCL base object set ID is "0x5000000000" (in hexadecimal) = "343597383680" (in decimal). For example, if the file system ID is "20", the object set ID of the file system = "0x4000000000" + "20".

object_id=?

Indicates the object ID.

The value must be greater than "0", and smaller than "2305843009213693952".

name=?

Indicates the entry name.

The value can contain letters, digits, underscores ("_"), and special characters that can be used in file names.

controller=?

Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

To query the entry which key is "qtree" in the object "3" of the object set "274877906944", run the following command.

developer:/>show space apo_entry_info object_set_id=274877906944 object_id=3 name=qtree controller=0A 

  Key : qtree                                     
  Value : 4001

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Key

Indicates key of the entry.

Value

Indicates value of the entry.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 489318

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next