No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication general_detail_trace

show remote_replication general_detail_trace

Function

The show remote_replication general_detail_trace command is used to show the detailed tracing information about a remote replication.

Format

show remote_replication general_trace pair_id=? opcode_id=? [ controller=? ]

Parameters

Parameter

Description

Value

pair_id=?

Remote replication ID.

To obtain the value, run "show remote_replication unified".

opcode_id=?

Operation code.

To obtain the value, run "show remote_replication general_trace".

controller=?

ID of the controller.

The value is in the format of XA or XB. X is an integer ranging from 0 to the value of the number of controller pairs minus 1.

Views

Developer view

Usage Guidelines

None

Example

Obtain the detailed tracing information of remote replication "e09796543d250005" with operation code "5".

developer:/>show remote_replication general_detail_trace pair_id=e09796543d250005 opcode_id=5 controller=0B 
Action ID Start Time Task Name Action Name 
--------- ----------------------------- ----------------------- ----------------------------------------- 
0 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_RELATION_CHECK 
1 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_START_TRANS 
2 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_SEND_CMD_TO_SLV 
3 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_UPDATE_TRANS 
4 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_HANDLE_REP_SVC 
5 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CREATE_LOG 
6 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CLEAR_SYNC_PROGRESS 
7 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CREATE_SYNC_SNAP_UP 
8 2015-05-04/11:29:10 UTC+08:00 CREATE_SYNC_SNAP_UP_SVC REP_SVC_ACTION_SNAP_LOCK_DS 
9 2015-05-04/11:29:10 UTC+08:00 CREATE_SYNC_SNAP_UP_SVC REP_SVC_ACTION_CREATE_SNAP_UP_PART1 
10 2015-05-04/11:29:10 UTC+08:00 CREATE_SYNC_SNAP_UP_SVC REP_SVC_ACTION_TASK_OVER 
11 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_LOG_PREPARE_FOR_SNAP_INFO 
12 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_UPDATE_LOG 
13 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_ADD_TX_TO_IO_FOR_SYNC 
14 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_ADD_SYNC_SNAP_INFO_TO_MEM 
15 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CREATE_SYNC_SNAP_DOWN 
16 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_ADD_TX_PERSISTENT_FOR_SYNC 
17 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_SET_SYNC_SNAP_DB 
18 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_DELETE_LOG 
19 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_SET_FLAG_PREPARING 
20 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_COMBINE_DCL 
21 2015-05-04/11:29:10 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_TASK_OVER 
22 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_MOD_FTRDB 
23 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_MOD_TIMER_STG 
24 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_STOP_TRANS 
25 2015-05-04/11:29:10 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_TASK_OVER

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Action ID

Action ID.

Start Time

Execution start time.

Task Name

Task name.

Action Name

Action name.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 486417

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next