No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore full_sync_cfg

change remote_replication_vstore full_sync_cfg

Function

The change remote_replication_vstore full_sync_cfg command is used to fully synchronize configurations of a specific vStore pair.

Format

change remote_replication_vstore full_sync_cfg pair_id=? partition_type=?

Parameters

Parameter

Description

Value

vstore_pair_id

Remote replication vStore pair ID.

To obtain the value, run the "show remote_replication_vstore general" command.

partition_Type

Type of a configuration synchronization partition.

  • "resource": Resource partition. Configurations in this partition include Resource user, Resource group, Identity mapping rule.
  • "global": global partition. Configurations in this partition include CIFS service config, NFS service config, Resource user safe strategy.
  • "domain_control": domain controller partition. Configurations in this partition include AD domain config, NIS domain config, Ldap domain config, DNS config.

Views

Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.

Example

Fully synchronize configurations of a specified vStore pair, whose ID is "200bc79b99520000" and partition type is "domain_control".

developer:/>change remote_replication_vstore full_sync_cfg pair_id=200bc79b99520000 partition_type=domain_control 
WARNING: You are going to start configuration full synchronization. 
Once configuration synchronization is started, remote configuration will be overwritten by local configuration. After configuration synchronization, the configuration cannot be restored. 
Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent configuration loss. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 502145

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next