No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hypervault dcl

delete hypervault dcl

Function

The delete hypervault dcl command is used to forcibly delete HyperVault DCL from a specified file system.

Format

delete hypervault dcl service_id=? file_system_id=? dcl_id=?

Parameters

Parameter

Description

Value

service_id=?

Service ID of the HyperVault pair.

Export the CCDB and check the incorrect service_id.

file_system_id=?

File system ID.

To obtain the value, run the "show file_system general" command.

dcl_id=?

DCL ID.

To obtain the value, run the "show remote_replication service_pair" command.

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used to delete the HyperVault configuration when the HyperVault database encounters errors and you cannot delete HyperVault pairs on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete hypervault_db general", "delete hypervault service_db", and "delete hypervault rss_type" commands. Restart the system after running the commands.

Example

Deleting the DCL of the HyperVault pair whose service ID is "0" and DCL ID is "101" from the file system whose ID is 0.

developer:/>delete hypervault dcl service_id=0 file_system_id=0 dcl_id=101 
DANGER: You are about to forcibly maintain HyperVault.This operation will cause the corresponding value-added pair to be unavailable. 
This operation enables you to forcibly delete the configuration information about a single item of HyperVault if HyperVault objects cannot be deleted properly. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 487435

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next