No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change global_task_restrict switch

change global_task_restrict switch

Function

The change global_task_restrict switch command is used to turn on or turn off the global task control switch. Global tasks do not include foreground I/O tasks, but include data repair, fault recovery, configuration, private I/O, and new device access tasks.

Format

change global_task_restrict switch switch=?

Parameters

Parameter

Description

Value

switch

Switch.

  • "on": turns on the global task control switch.
  • "off": turns off the global task control switch.

Views

Developer view

Usage Guidelines

You can execute the "show global_task_restrict switch" command to show the switch status.

Example

Turn off the global task control switch.

developer:/>change global_task_restrict switch switch=off 
DANGER: You are about to enable or disable the global task management function. After this operation, if exceptions occur, some background tasks of the disk array are not allowed to be executed again for six hours. 
Suggestion: Before performing this operation, confirm that you want to enable or disable the global task management function. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503125

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next