No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
initlocalpasswd

initlocalpasswd

Function

The initlocalpasswd command is used to initialize the super administrator password of the current controller temporarily.

Format

initlocalpasswd

Parameters

None

Modes

serial port mode

Usage Guidelines

  • Only run this command through the serial port.
  • This command is a temporary method to initialize the super administrator password of the current controller only when the system is abnormal (related modules are not loaded).
  • This operation will cause the difference between super administrator password of this controller and other controllers. The original password will be recovered after resetting.

Example

Initialize the super administrator password of the current controller.

Storage: _super_admin> initlocalpasswd 
You are about to initialize the super administrator password of the current controller. This operation is a temporary login method for super administrators and will lead to the difference between super administrator passwords of this controller and other controllers. The original password will be recovered after resetting. 
Suggestion: Before performing this operation, confirm that you have known about the impact of this operation.  
Have you read warning message carefully?(Y/N)Y 
Are you sure to execute this operation?(Y/N)Y 
please input username:admin 
*****Please enter new password for admin :***** 
*****Please re-enter new password for admin :***** 
Succeeded in initializing the admin password.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 487126

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next