No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
datafs_cp

datafs_cp

Function

The datafs_cp command is used to copy datafs to the flash memory.

Format

datafs_cp

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Copy datafs to the flash memory.

Hi1710_UBOOT> datafs_cp                                                                                                              
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the  
PCB cannot work normally.                                                                                                            
###erase flash from :46200000 to :47ffffff,please wait a while                                                                       

.................................................................................................................................... 
............................................................................................................ done                    
Erased 240 sectors                                                                                                                   
Copy data file system to flash,please wait a while                                                                                   
 9....8....7....6....5....4....3....2....1....                                                                                       
Success to load data file system.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 486966

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next