No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ioctrl showio

ioctrl showio


The ioctrl showio command is used to query the count of I/Os in the IOCTRL module.


ioctrl showio




Diagnostic view

Usage Guidelines

This command is used to query the count of I/Os in the IOCTRL module.


Query the count of I/Os in the IOCTRL module.

admin:/diagnose>ioctrl showio 

  Name                             Start        Back Good Back Retry Back Bad     Not Back 
  ------------------------------ ------------ ------------ ------------ ------------ ------------ 
  IOCTRL_COUNTER_BLOCK_RSS_IO                 0            0            0            0            0 
  IOCTRL_COUNTER_UNBLOCK_RSS_IO               0            0            0            0            0 
  IOCTRL_COUNTER_HANG_RSS_IO                602          602            0            0            0 
  IOCTRL_COUNTER_UNHANG_RSS_IO              511          511            0            0            0

System Response

The following table describes the parameter meanings.




Count of I/Os to the module.

Back Good

Count of I/Os for which a success message is returned.

Back Retry

Count of I/Os for which a retry message is returned.

Back Bad

Count of I/Os for which a failure message is returned.

Not Back

Count of I/Os for which no message is returned.


Count of blocked value-added I/Os.


Count of unblocked value-added I/Os.


Count of hanged value-added I/Os.


Count of unhanged value-added I/Os.

Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 501452

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next