No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dlm zone

change dlm zone

Function

The change dlm zone command is used to set a zone for the current operation.

Format

change dlm zone zone_name=? controller=?

Parameters

Parameter

Description

Value

zone_name=?

Zone ID.

To obtain the value, run the "show dlm zone" command.

controller=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

None

Example

None

developer:/>change dlm zone zone_name=1094795520 controller=0A 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 500213

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next