No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fdsa switch

change fdsa switch

Function

The change fdsa switch command is used to enable or disable the Fault Detecting & Self-Healing Architecture (FDSA) function. After the FDSA function is enabled, system faults are automatically detected and then healed.

Format

change fdsa switch switch=?

Parameters

Parameter

Description

Value

switch=?

Switch of the FDSA function.

  • "yes": enables the FDSA function.
  • "no": disables the FDSA function.

Views

Developer view

Usage Guidelines

When performing operations that may cause system exceptions (for example, upgrade), disable the FDSA function so that the exceptions will not be misjudged as system faults. After these operations are completed and the system becomes stable, you can manually enable the FDSA function.

You can determine whether to enable or disable the FDSA function after checking the status of the FDSA function by executing the "show fdsa switch" command.

Example

Enable the FDSA function.

developer:/>change fdsa switch switch=yes 
WARNING: You are about to enable or disable the Fault Detecting & Self-Healing Architecture (FDSA) function. 
Suggestion:Before performing this operation, please confirm that you want to do this. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 497674

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next