No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete private_device db

delete private_device db


The delete private_device db command is used to forcibly delete the DB information about a specified remote device.


delete private_device db private_device_id=?






Indicates the ID of a remote device.

To obtain the value, run "show remote_device general".


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance.2:This command can only be used when a remote device with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.3:Restart the system after running the command.


To delete the DB information about the remote device 0, run the following command.

developer:/>delete private_device db private_device_id=0 
DANGER: You are clearing the DB information about remote device, this operation will forcibly delete DB information about remote device. 
Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 

Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 497981

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next