No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show overload_control general

show overload_control general

Function

The show overload_control general command is used to check overload control related parameters.

Format

show overload_control general

Parameters

None

Views

Developer view

Usage Guidelines

None

Example

  • To display the parameters when overload control is enabled, run the following command.
      
    developer:/>show overload_control general 
    Enabled                   : Yes 
    Max Inner IOPS            : 2048000 
    Min Inner IOPS            : 102400 
    Max Inner Bandwidth(MBps) : 1024 
    Min Inner Bandwidth(MBps) : 128 
    CPU Overload Threshold : 90 
    Alarm Time(s)             : 300 
    Max Unmap Bandwidth(MBps) : 1024 
    Min Unmap Bandwidth(MBps) : 256
  • To display the parameters when overload control is disabled, run the following command.
    developer:/>show overload_control general 
    Enabled                   : No 
    Max Inner IOPS            : 2048000  
    Min Inner IOPS            : 102400  
    Max Inner Bandwidth(MBps) : 1024  
    Min Inner Bandwidth(MBps) : 128 
    CPU Overload Threshold : 90 
    Alarm Time(s)             : 300 
    Max Unmap Bandwidth(MBps) : 1024 
    Min Unmap Bandwidth(MBps) : 256

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Enabled

Indicates the status of overload control.

Max Inner IOPS

Maximum inner IOPS.

Min Inner IOPS

Minimum inner IOPS.

Max Inner Bandwidth(MBps)

Maximum inner bandwidth.

Min Inner Bandwidth(MBps)

Minimum inner bandwidth.

CPU Overload Threshold

CPU overload threshold.

Alarm Time(s)

Overload alarm time.

Max Unmap Bandwidth(MBps)

Maximum unmap bandwidth.

Min Unmap Bandwidth(MBps)

Minimum unmap bandwidth.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 489046

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next