No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ckgiof ckisolatequery

ckgiof ckisolatequery

Function

The ckgiof ckisolatequery is used to query the chunk isolation information of specified disk in the specified disk domain.

Format

ckgiof ckisolatequery -p poolid -d diskid

Parameters

Parameter

Description

Value

poolid

Disk domain ID.

The ID can be obtained by running the "show disk_domain general" command in super administrator mode.

diskid

Logical disk ID.

To obtain the value, run the "pmgr showdisk" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query the chunk isolation information of disk domain 0 and disk ID 512.

admin:/diagnose>ckgiof ckisolatequery -p 0 -d 512 
DISK ID  CKG ID      ChunkID  Recon State 
-------  ----------  -------  ------------ 
512      2181054464  209408 YES

System Response

The chunk isolation information is displayed if the disk domain and the specified disk to be queried are correct, and the isolated chunk exists. If the isolated chunk does not exist, Query Disk Log Finished is displayed.The following table describes the parameter meanings.

Parameter

Meaning

DISK ID

Disk where the chunk is on.

CKG ID

CKG where the chunk is in.

ChunkID

Chunk ID.

Recon State

Whether the chunk is reconstructed.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 488715

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next