No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete remote_replication_rsstype

delete remote_replication_rsstype


The delete remote_replication_rsstype command is used to forcibly delete the remote replication property of a specified LUN.


delete remote_replication_rsstype type=? lun_id=?






Indicates the ID of a LUN.

To obtain the value, run "show lun general".


Indicates the LUN type.

The value can be "primary" and "secondary", where

  • primary: the LUN is the primary LUN of the remote replication.
  • secondary: the LUN is the secondary LUN of the remote replication.


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when you need to unset the lunType and you cannot delete the remote replication with incorrect DB information. Do not use this command in other scenarios.
  • This command must be used with the "delete remote_replication_db" command. Restart the system after running the commands.


To delete the remote replication property of LUN 0, run the following command:

developer:/>delete remote_replication_rsstype type=primary lun_id=0 
DANGER: You are clearing the remote replication properties of a specified LUN, this operation will forcibly delete the LUN properties of remote replication. 
Suggestion: Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503793

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next