No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove remote_device white_list

remove remote_device white_list


The remove remote_device white_list command is used to delete a specific white list of heterogeneous disk arrays.


remove remote_device white_list record_id=?






Indicates the white list ID.

To obtain the value, run "show remote_device white_list".


Developer view, Engineer view

Usage Guidelines

  • Running this command will delete the white list of heterogeneous disk arrays from the system.2:Before running this command, check that the white list you have selected is correct.


To remove the heterogeneous disk array white list 88, run the following command:

engineer:/>remove remote_device white_list record_id=88 
WARNING: You are going to remove the remote device white list. This operation deletes the information about the remote device white list from the system. 
Suggestion: Before you perform this operation, ensure that you have selected the correct remote device white list and confirm that the remote device white list can be deleted. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 501972

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next