No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa showreclaiminfo

spa showreclaiminfo

Function

The spa showreclaiminfo command is used to query space reclamation information about storage pools.

Format

spa showreclaiminfo -p storagepool id

Parameters

Parameter

Description

Value

-p

Storage pool ID.

To obtain the value, run "show storage_pool general" in super administrator mode.

Views

Diagnostic view

Usage Guidelines

This command must be executed on the working controller of a disk domain.

Example

Query space reclamation information about storage pool "0".

admin:/diagnose>spa showreclaiminfo -p 0 

------------------Basic Info------------------ 
Disk Domain ID                        : 0 
Storage Pool Reclaimed Capacity       : 0 MB 
Start Reclaim Time                    : 0 
Last Cycle Ratio                      : 0 MB/S 
Current Ratio                       : 0 MB/S 
Time                                  : 0 S 
Need Reclaim Storage Pool Num         : 0 
------Storage Pool Reclaim Capacity Info------- 
All Need Reclaim                      : 0 MB 
Extent Log Type                       : 1 
Storage Pool Reclaim Capacity Unit : 10 GB 
--------Disk Domain Alloc Capacity Info-------- 
Alloc Capacity                        : 0 MB 
Last Cycle Ratio                      : 0 MB/S 
Current Ratio                         : 0 MB/S 
Time                                : 1 S 
-------Disk Domain Reclaim Capacity Info------- 
Reclaim Capacity                      : 0 MB 
Last Cycle Ratio                      : 0 MB/S 
Current Ratio                         : 0 MB/S 
Time                                  : 1 S

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Disk Domain ID

Disk domain ID.

Storage Pool Reclaimed Capacity

Reclaimed capacity of a storage pool.

Start Reclaim Time

Start time of storage pool space reclamation.

Last Cycle Ratio

Speed of the last space reclamation for a storage pool.

Current Ratio

Current space reclamation speed of a storage pool.

Time

Duration of storage pool space reclamation.

Need Reclaim Storage Pool Num

Number of storage pools whose space is being reclaimed in a disk domain.

All Need Reclaim

Total capacity to be reclaimed in a storage pool.

Extent Log Type

Log type for storage pool space reclamation. The value "1" indicates that logs are recorded for space reclamation and value "0" indicates no logs for space reclamation.

Storage Pool Reclaim Capacity Unit

Current space reclamation granularity of a storage pool.

Alloc Capacity

Capacity that is being allocated or released by a storage pool.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503199

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next