No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
disklog query

disklog query

Function

The disklog query command is used to query disk logs of the specified scope on a disk.

Format

disklog query -p poolid -d diskid [ -b beginlba -l length ]

Parameters

Parameter

Description

Value

poolid

Disk domain ID.

To obtain the value, run the "show disk_domain general" command in super administrator mode.

diskid

Logical disk ID.

To obtain the value, run the "pmgr showdisk" command.

beginlba

Start address on a disk, -l length must be specified after this parameter is specified.

The value must be smaller than the maximum disk capacity and is expressed in sectors.

Views

Diagnostic view

Usage Guidelines

Run the "disklog query -p poolid -d diskid" command to query the log information of the entire disk.

Run the "disklog query -p poolid -d diskid [ -b beginlba -l length ]" command to query the log information of the specified scope.

Example

Query disk logs of disk domain 0 and disk ID 512.

admin:/diagnose>disklog query -p 0 -d 512 
  Query Disk Log       : Success 
  Total Log Number : 0 
admin:/diagnose>

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503586

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next